Knick Knack Shelf With Color Changing Paint

0
5
Knick Knack Shelf With Color Changing Paint
Knick Knack Shelf With Color Changing Paint

Kind of fresh the only scraps he has that right there pretty much use the whole sheet of plywood. Anyway, and I was going to mark those slots the instructions were the plans say that you got to measure out the distance halfway just cut it every time there’s a slot. So I’ve always attended the big ones are 10 inches across the slot goes 5 inches deep that’s the most prominent part he’s got a re-measured each time.


They were just taking the. The stencils and the boards themselves and just make little marks where the sponsoring a line about. So I just leave my stencil on top of the board, and I set it up a little bit to make the bottom marks, and I set it down to the top scores making sure it’s all even.


No word on the stack a small boards one of the common ones is going to keep ongoing. Right now, as a mark in the cutouts, you can see on that for the lines that are to May 2. No, well, where I need to make each of the slots.

So what I’m doing is I’m taken in each little marks that I made with my sense of before, and I’m learning this board up that I just want to scrap pieces. With the lines with the dots on there and there’s one there on the other side. You can see and at the top end up as well Ionis take honorable fence autumn of that just like that.


And that’s Mrs. Marshall street, and so you can keep the slots. No, where they’re supposed to be because this whole thing will be pretty spot on with the measurements; otherwise, it’s not. Transformation progress someone tells you what I’ve been doing up to this point. I’ve taken the boards themselves, and I’ve marked the midpoint on each of the stretch referring slots. The. If you take the whole measurement, you can see this one is eight a little over 8 and 8.


So what I did is it don’t you want this what be a little bit longer than usual so I just barely over for honest just because they want the bigger end of the half not only by like an eighth of an inch the figure into that to be here so when you cut it. It slides down each. Like, let’s say.


With each of the marks is going to have for with the over cuts now sorry, so there’s 4 of each piece is the big medium and small, so there’s going to be 2 with the slots on top and then top with the slots on the bottom.
They kind of mesh together when you’re putting the whole thing together like this the ones with the slots on the top so you can see this one has a groove in the top right here salicylates underneath. This one they’re tough to get underneath if the angles aren’t perfect; she wants to cut just a little bit big. You know how I drew the lines on it you want to cut right on those lines.


So you have a little bit of space to wiggle you know it depends on you know how good you are with us on everything. You can do it however you want. So when I take the skills are for I guess jigsaw. Hi Y. Catamount the sales into this one. I would come along this line here with the chicks on. Noted this part right here in that backup, and I’d curve in like this cut that night curving again cut that curve, and still, I get that that we have a gap.


Right here where I can put the jigsaw in and cut straight across right here, but I have this kind of hold shape cut out, and then I come in on this side. And just drop the whole chunk out. Because what I’ve done right here, I came in straight, and I backed up, and then I cut right there all over the centerline, and I cut out those jump just like that, and that leaves it just big enough for my sublet decision just down there.


I can cut straight across, as I mentioned before. I am making some serious progress. Come a long way since we came from the string tied to the growing. So anyway everything’s. Put together right now, so I’m probably gonna do just get some sandpaper and kindest most images. If you look closely sometimes, it is like little gaps and stuff. There, there’s one. Of great calls and things like that oh probably go through an. Kind of clean that up, please fill the gaps and stuff like that.


It was returned in. Make sure your culture. Pretty right on. I thought of you know harder to put the pieces in the far you got out from the center, but it’s easier to put the increases in. Serviceman through. Just have some of the bigger holes and stuff, but the call could. Nothing too big. I guess you could go through, and you know we hit every corner if you want to make it all uniforms, and to me, it’s not that big of a deal my all my Custer pretty. Retired anyway. So.


I was going to go through a base coat on it right now black, and then I bought another paint can. It’s kind of cool is this color changing. Paint so it kind of goes from black to green just kind of depends on what to. Type a light-year in. Anyway yeah, that’s what you get when you don’t know friends don’t live with your mom. You can pick your own Franco’s. Severely campaigns this thing laying down very well this briefing doesn’t go down in those cracks, so I came out here. You propped up with the hold.


And from a fast little around. Square now I can’t access double size, and I’ll be able to pay a little bit easier. In your opinion, make sure that the backends all lined up with all these small cross-sections. So that you’re not.
I don’t know if you’re hitting all the servicer they’re going to have to show them what it’s up against the wall so like let’s say if this board was like an inch this direction then if you painted it when you put it back into place 30 thanks for showing on the side. In research about all the black paint on this, the base coat someone to go ahead and let it dry for a second and then put on the next coach of the color pink the cool stuff. The talk of cans of spray paint is a lot more, and I thought it was the.


But we finally finished. So this is what the shelves finally look like. So if we can get kind of. The idea for Alico is changing these numbers. Since. So that’s how you make the sales order ID now just mountain. It’s kind of a side profile. The very questions or anything else I should leave it in the comments. Thank you for the videos every week or so, so if you’re likely to see that subscribe. And that’s it, thanks.


The things that I do differently persecuted over again one is I would probably use a different password or use the same stencils, but you’re out of the board that’s more email this post you made it to shelves these are hard to fit at a one piece of plywood. If you are into that, and I want to see if I would make sure that you cut as close to the line.


It’s possible I put on my phone right off each other stencils so that you know one cat will hit two stencils at some point if that makes sense just because like if you read even a millimeter of the gap between the two also if you have a super fine as long at all it’s this almost on that, so I made my work very good just a little bit yeah.


All of these files I heard the other guys just as he took off, I believe the centimeter at the bottom, which made the entire shelves smaller, which is good because the cells are pretty few 0 cells. Yeah, there are a few things that are done.

LEAVE A REPLY

Please enter your comment!
Please enter your name here